Do you know the difference between high-combed, combed, semi-combed and plain combed?_China Textile Fabric,Uniform Fabric,Cotton Fabric Supplier & Manufacturer & Factory

High quality: refers to the cotton grade is relatively high, which means the raw materials are guaranteed and better. Since it is a high-quality finish, general combing is used during post-processing.

Combing, semi-combing, and carding are the three methods of carding process:

Combing: represents high quality, equivalent to an additional process, which is to draw the combed cotton sliver into a roll, and then further comb it through a combing machine. The purpose is to further remove short lint and impurities in the fiber and make the fiber Straightening is better. In this way, combed strips are made for use in the next process (drawing). The cotton yarn produced in this way has high strength, good evenness and good gloss. Generally used to produce yarns with higher quality requirements or high-count yarns.

Semi-fine: represents medium quality. It is actually between carded and combed. This is generally done in textile mills. For example, if 6 drawing lines are combined into one, then 3 of the 6 drawing lines are combed. Cotton slivers, 3 carded cotton slivers, will produce semi-combed yarn. (You can also change the ratio, such as 2 roots and 4 roots, or 4 roots and 2 roots)

Carding: represents low quality, that is, the cotton rolls (blow carding may not be rolled) are passed through the carding machine to remove impurities and short lint, and are made into slivers for the next process (drawing).